Spring Cleaning

8 03 2012

Dale BertramSpring cleaning has always been popular and just as our homes need it, so do our vehicles.  Today we’ll talk about getting them clean underneath it all!   During the regular use of your vehicle, the fluids that protect critical components wear out causing unneeded corrosion and wear.  Harmful deposits like carbon, scale, sludge, and rust sneak in and steal the vitality and life from your vehicle.  If maintained regularly, your vehicle can exceed 200,000 miles or more without incurring expensive repair bills.

Oil Change – The engine is the most expensive part of any vehicle, so preserving it is vital.  Motor oil reduces the amount of friction on the engine’s moving metal parts, preventing them from overheating and prematurely wearing.  Over time, motor oil oxidizes, producing harmful sludge that can reduce engine cooling and plug passages necessary for oil lubrication.  The easiest way to prevent sludge build up and reduce friction is to change oil and (filter) every 3 months or 3,000 miles.  We also offer motor oil additives that will prolong the life of your engine.

Transmission Service – Over 90% of all automatic transmission failures are due to overheating and fluid contamination.  Transmissions operate under widely adverse conditions and expose the transmission fluid to wild swings in temperature.  Dirty and contaminated fluid can cause erratic shifting, excessive chatter, and premature wear.  Transmissions should be serviced every 3 years or 50,000 miles.  This can be done via traditional transmission filter and fluid replacement (40% or fluid is replaced) or by exchange service (95% fluid replacement but no filter replacement

Cooling System Fluid Exchange – Cooling system failure is the #1 cause of engine-related breakdowns.  Minerals in water combine with the additives in coolant, forming scale.  The scale build up can result in decreased heat transfer on the surfaces of the radiator and heads resulting in overheating.  Coolant also breaks down over time losing its anti-corrosive properties.  This can lead to leaky radiators and water pumps, stuck thermostats, and plugged heater cores.  The cooling system fluid should be exchanged every 2 years or 30,000 miles to prevent scale and corrosion build up.

Brake System Fluid Exchange – Brake fluid absorbs moisture.  This lowers the boiling point of the brake fluid, reducing braking performance.  In addition, moisture causes brake fluid to become corrosive which can damage the master cylinder, wheel cylinders, brake lines, and abs components.  To prevent a spongy brake pedal and unneeded repairs, brake fluid should be exchanged every 3 years or 50,000 miles or at least whenever brake pads/shoes are replaced.

Fuel System Cleaning – Residual fuel vapors leave behind carbon deposits that restrict the flow of air and fuel to the engine.  These deposits will rob your engine of fuel economy and may cause stalling, knocking, loss of power, or hard starting.  A complete three step air/fuel induction flush performed every 2 years or 30,000 miles will improve engine performance and reduce emission output.

When you get into spring cleaning this year, don’t forget that underneath it all, your vehicle needs to be cleaned too!

Happy Motoring!

 

 

Advertisements

Actions

Information

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s




%d bloggers like this: